Greetings #diyhub community, it is my pleasure to share with you my new creative project for the start of this week on this wonderful platform. It is a beautiful macramé bracelet. I can tell you that there is nothing more satisfying in the world than seeing someone wear a gift that you made with your own hands using your creativity.
Today I am sharing with you a beautiful accessory made with flat weaving using snakeskin thread and letter beads. I am very happy to be making my fourth post on this platform, and my goal is to contribute my knowledge and learn from each of you. Making this type of accessory is one of my favorite hobbies because it helps me train my brain and improve my attention span.
This is a delicate, attractive, and very eye-catching bracelet with flat weaving and beads that make it a beautiful piece. It is a very simple piece of jewelry to make, but the end result is amazing. This bracelet is very easy to make and can be completed in just a few minutes. It is very attractive, and I loved the final result.
This time, I am taking on the challenge of creating a beautiful accessory for one of the characters in the Splinterlands game known as Tarsa.
May God bless you, and I hope you like my creation. @jesuslnrs, I appreciate your guidance on this matter, as I have made three posts in the community and unfortunately have not received any support. Could it be that I am making some kind of mistake since I am new? Your suggestions are more than welcome.
Saludos comunidad #diyhub es un gusto compartir con ustedes mi nuevo proyecto creativo de éste inicio de semana en esta maravillosa plataforma. Es una linda pulsera macramé muy hermosa . Les cuento que no existe en el mundo nada más satisfactorio que poder ver a alguien usar un regalo que tu hiciste con tus manos usando la creatividad.
El día de hoy les comparto un lindo accesorio en tejido plano con hilo piel de serpiente y cuentas de letras. Les comento que me siento muy feliz por realizar mi cuarta publicación en esta colmena y mi propósito es poder aportar mis conocimientos y aprender de cada uno de ustedes. Realizar este tipo de accesorio es uno de mis pasatiempos favoritos ya que me ayuda a entrenar mi cerebro y mi capacidad de atención
Se trata de una delicada, atractiva y muy llamativa pulsera con tejido plano y cuentas que hacen de ésta una pieza hermosa .Es una joya muy sencilla de hacer pero el resultado final es asombroso. Esta pulsera es muy fácil de elaborar y en pocos minutos la tenemos hecha. Es muy atractiva y me encantó el resultado final.
En esta oportunidad me uno al desafío en crear un hermoso accesorio para uno de los personajes del juego de splinterlands conocido como Tarsa
Que Dios les bendiga y espero les guste mi creación. @jesuslnrs agradezco tus orientaciones al respecto ya que he realizado tres publicaciones en la comunidad y lamentablemente no he recibido apoyo. Será que estoy cometiendo algún tipo de error ya que soy nueva? Tus sugerencias son más que bienvenidas
Bienvenidos a mi blog!!**
The materials we will use to make this beautiful bracelet with flat weave are:
Korean thread
Scissors
Tinder
Tape measure
Adhesive tape
Beads
Marker
Los materiales que utilizaremos para realizar esta hermosa pulsera con tejido plano son:
Hilo coreano
Tijera
Yesquero
Cinta métrica
Cinta Adhesiva
Cuentas
Marcador
To start this delicate bracelet we will cut 35cm of Chinese thread that we will use as a base to make the weaving.
Para comenzar esta delicada pulsera vamos a cortar 35cm de hilo chino que usaremos como base para realizar el tejido
Then I cut a 120cm strand of yarn that I will use to weave the flat weave.
Luego corté una hebra de hilo de 120cm que usaré para realizar el tejido en forma de plano
We start our flat weaving as follows: First we take the base yarn and measure 7cm from the top downwards and fasten with a strap, from that distance we start weaving.
Comenzamos nuestro tejido plano de la siguiente forma: Primero tomamos el hilo base y medimos 7cm de la parte superior hacia abajo y sujetamos con un tirro, a partir de esa distancia comenzamos a tejer
We begin by introducing the beads and letters to form the name of the character Tarsa.
Then we pass the 120cm yarn under the base yarns and make a simple knot, the yarn must match at the ends. Then we pass the thread on the right side over the base threads in the form of a P. Then we pass the thread on the left side over the right thread that is on the left side and pass it under the base threads and pull it through the inside or ring of the same as shown in the image in step three, then we press and tie the knot.
Iniciamos introduciendo las cuentas y las letras para formar el nombre del personaje Tarsa.
Luego el hilo de 75cm lo pasamos por debajo de los hilos base y hacemos un nudo sencillo, el hilo debe coincidir por las puntas. Después pasamos el hilo del lado derecho por encima de los hilos base en forma de P. Después pasamos el hilo del lado izquierdo por arriba del hilo derecho que se encuentra en el lado izquierdo y lo pasamos por debajo de los hilos base y lo sacamos por el interior o argolla del mismo como se muestra en la imagen en el paso tres , después presionamos y hacemos el nudo
After this step, now, we pass the thread on the left side above the base threads and form a kind of four, then we pass the thread on the right side above the left thread that is on the right side, then we pass it under the base threads and take it out through the inside of the ring on the left side, then pressed so that we have a knot as shown in the image.
Después de realizar ese paso, ahora, pasamos el hilo del lado izquierdo por arriba de los hilos base y formamos una especie de cuatro, luego pasamos el hilo del lado derecho por encima del hilo izquierdo que se encuentra en el lado derecho , después lo pasamos por debajo de los hilos base y lo sacamos por el interior de la argolla del lado izquierdo, después presionados para que nos quede un nudo como se nos muestra en la imagen
We continue to follow the same procedure for flat knots.
Continuamos realizando el mismo procedimiento de los nudos planos.
Now we introduce Czech glass and make flat knots.
Then we insert the beads to form the character's name (Tarsa).
Ahora introducimos el cristal checo y hacemos nudos planos
Después introducimos las cuentas hasta formar el nombre del personaje (Tarsa)
We perform the same step until we reach a distance of 14cm.
Realizamos el mismo paso hasta llegar a una distancia de 14cm
Then I cut a 15 cm piece of thread to make the clasp or slip knot for the bracelet. To do this, I made a barrel knot. Then I cut off the excess ends and sealed them with the lighter.
And that's how this beautiful bracelet for Tarsa turned out.
Después corté un hilo de 15cm para hacer el trancadero o nudo corredizo de la pulsera. Para eso realicé un nudo barril. Después corté las puntas sobrantes y con el yesquero sellé.
Así quedó ésta hermosa pulsera para Tarsa
Welcome to my blog! Thank you for joining me on this new adventure I'm about to embark on.
Here is my final creation.
Bienvenidos a mi blog !! Gracias por acompañarme en toda esta nueva aventura por iniciar.
Les muestro mi creación final
Thank you for joining me on my new beekeeping adventure.
Gracias por acompañarme en mi nueva aventura de colmena
Translated with https://www.deepl.com/translator
All images are of my authorship
Todas las imágenes son de mi autoría